LX - 30
50 Pack | Jess Mae LX 30 - Genuine | 6 Inch Long | XL Cotton Candle Wicks | Self Trimming, Pre-Waxed & Pre-Tabbed | DIY Candle Making Supplies | Best Wicks for Container, Pillar & Votive Candles
Clicking this button will take you directly to Amazon, where you can complete your purchase securely.
About the LX 30 Wick
The LX 30 is a precision flat braided wick designed to provide a clean, consistent burn in a wide variety of candle waxes. LX wicks feature a unique braid construction that helps minimize carbon buildup, encourages a stable flame, and promotes even wax consumption throughout the life of the candle.
LX wicks are especially popular for container candles because they perform well in natural waxes, including soy and soy blends, while helping reduce mushrooming and afterglow.
Jess Mae® LX 30 Specifications
* Wick Series: LX
* Wick Size: LX 30
* Length: 6 inches
* Tab Size: 20 mm × 6 mm
* Primer: Vegetable Wax
* Construction: Flat Braided Cotton Wick
* Core: Coreless
* Rate of Consumption (ROC): (Add manufacturer specification)
* Average Flame Height: (Add manufacturer specification)
* Average Melt Pool Diameter: (Add manufacturer specification)
Recommended Starting Applications
LX 30 is commonly used as a starting point for:
* Large container candles
* Wide-mouth container candles
* Soy wax candles
* Soy blend candles
* Coconut-soy wax blends
* Paraffin wax
* Beeswax blends
For most container candles, LX 30 is often tested first in vessels around 4.5 to 5.0 inches in diameter.
Actual results will vary depending on wax type, fragrance load, dye load, vessel shape, and burn environment. Always perform complete burn testing before production.
Testing Tips
1. Trim the wick to approximately 1/4 inch before each burn.
2. Test using your final wax, fragrance, dye, and container combination.
3. Record melt pool diameter after each burn cycle.
4. Monitor flame height and wick stability.
5. Measure container temperatures throughout testing.
6. Allow the candle to cool completely between burn sessions.
7. Complete a full burn test before selecting a final wick size.
Troubleshooting
Candle Is Tunneling
Possible causes:
* Wick too small
* Heavy fragrance load
* Container diameter too large
Consider evaluating a multi-wick configuration for very wide containers.
Flame Is Too Small
Possible causes:
* Dense wax formulation
* High fragrance load
* Oversized vessel
Evaluate a multi-wick design if a full melt pool cannot be achieved.
Excessive Mushrooming
Possible causes:
* Wick oversized
* Excess fragrance oil
* Improper wick trimming
Trim the wick before each burn and retest.
Container Running Too Hot
Possible causes:
* Wick oversized for the container
* Container diameter too small
Consider testing LX 28 or using a smaller container.
Frequently Asked Questions
Is LX 30 good for soy wax?
Yes. LX 30 is commonly used in soy wax and soy-blend candle formulations and is an excellent starting point for extra-large container candles.
What container diameter should I test first?
Most candle makers begin testing LX 30 in containers approximately 4.5 to 5.0 inches in diameter.
Does LX 30 reduce mushrooming?
The LX wick series is designed to promote a clean, stable burn that can help reduce carbon buildup and mushrooming when properly matched to the candle.
Can I use LX 30 with fragrance oils?
Yes. LX wicks perform well with many fragrance oils, though every candle formulation should be thoroughly tested.
Can LX 30 be used with natural waxes?
Yes. LX wicks are commonly used with soy wax, soy blends, coconut blends, beeswax blends, and paraffin wax.
Why is my candle tunneling?
The wick may be undersized for the wax, fragrance load, or vessel diameter. For extra-wide containers, a multi-wick configuration may provide more even heat distribution than a single larger wick.
Should I trim the wick?
Yes. For best performance and a cleaner burn, trim the wick to approximately 1/4 inch before every burn.
